Ụdị nkenke dị elu nke dị elu Servo Press
Ozi Obere Obere Servo Press
| Nkọwapụta igodo HSF-5T | ||
| Nkọwa | Nkeji | Nkọwa |
| Ike pịa | KN | 50 |
| Ogologo strok | mm | 20 |
| Ọrịa strok kwa nkeji | SPM | 5-500 |
| Nwuo elu | mm | Enwere ike ịhazi ya |
| Nkwado | mm | 220×300 |
| Mpaghara ala dị ala | mm | Enwere ike ịhazi ya |
| Imeghe akwa | mm | Enwere ike ịhazi ya |
| JIS ziri ezi | - | Ọkwa kacha mma |
| Max. arọ nke elu anwụ | kg | 20 |
| Ike servo | KW | 3 |
| Ibu igwe | kg | 900 |
| Paramita igodo nri | ||
| Onye nri | - | servo rola |
| Obosara nri | mm | 5-40 |
| Ọkpụrụkpụ ihe | mm | Oke 0.8 |
| Nye nri servo | KW | 0.75 |
| Ntuziaka nri | - | Aka ekpe → aka nri |
✔ N'ala nwụrụ anwụ ziri ezi
✔ The deviation nke ọ bụla ebu bụ: 1 ~ 2μm (500spm)
✔ N'ala nwụrụ anwụ ziri ezi
✔ Mgbanwe okpomọkụ: 10μm / 1H (500s pm)
Uru nke HSF-5T
1. Izi ezi nke etiti nwụrụ anwụ dị elu, ihe ziri ezi nwere ike iru 1-2um (0.002mm), na arụmọrụ kwụsiri ike dị elu n'oge mmepụta.
2. Ọ bụghị njedebe site na mmalite nke ala, a pụkwara iji ya mee ihe n'ala nke abụọ ma ọ bụ n'elu.
3. Ogologo ihe dị iche iche nke ngwa ngwa, nwere ike jikọọ na mmepụta akara iji nweta akpaaka zuru oke.
4. Chekwaa n'ichepụta ebu na ụgwọ ọrụ.
5. Enwere ike ịhazi nkọwa dịka mkpa ndị ahịa si dị.
6. Karịsịa kwesịrị ekwesị maka ụfọdụ ngwaahịa stamping mmanụ na-enweghị mmanụ, nwere ike dochie ahịa na-adọta elu na ala pịa.
Okwu Ngwa
●Kewaa ọnụ ụzọ ahịrị abụọ ma tinye ya n'ahịrị mmepụta mgbakọ.
●Stamping na ntinye ịkpụzi injection.
●Stamping electroplating ntinye.
● Stamping na-ehulata mwekota tupu na mgbe electroplating
● Nchikota stampụ ngwaahịa square pin
Nhazi ngwaahịa
